Skip to product information
1 of 4


FIBARO Single Switch 2

FIBARO Single Switch 2

Regular price $99.99 AUD
Regular price Sale price $99.99 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
  • We use Australia Post Carbon Neutral Shipping: 2-5 Days $9.99, 1-3 Days $15 or StarTrack Premium $20
  • Order before Midday and we Dispatch the same day
  • Found a Cheaper Price we will beat it by 5%

FIBARO Single Switch 2 (FGS-213)

FIBARO Single Switch 2 (FGS-213) is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Single Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.


  • Compatible with any Z-Wave or Z-Wave+ Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Advanced microprocessor control
  • Active power and energy metering functionality
  • Works with various types of switches – momentary, toggle
  • three-way, etc
  • To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
  • FIBARO Switch 2 is an extension unit

Technical data

Power supply: 100-240V~ 50/60 Hz
Rated load current: Single Switch 2 (FGS-213):
IEC standards: 8A
UL standards (resistive load): 6.5A
UL standards (incandescent load): 5A
Double Switch 2 (FGS-223):

IEC standards: 6.5A per channel, 10A overall
UL standards (resistive loads): 6A per channel, 9.5A overall
UL standards (incandescent loads): 3A per channel
Operating temperature: 0-35°C
For installation in boxes: Ø ≥ 50mm, depth ≥ 60mm
Radio protocol: Z-Wave (500 series chip)
Radio signal power: up to 1mW
Radio frequency: 868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
Radio transmit power: up to 6 dBm (EIRP)
Range: up to 50m outdoors
up to 40m indoors
(depending on terrain and building structure)
Comply with EU directives: RED 2014/53/EU
RoHS 2011/65/EU
Dimensions (L x W x H): 42.5 x 38.25 x 20.3 mm


Manual for FIBARO Single Switch 2 (FGS-213)

View full details

Customer Reviews

Based on 1 review
Andrew Rowsell-Jones
Fibaro stuff works --- with a Fibaro controller

I have a z-wave installation in my house and switched to a Fibaro controller since they seem to be the only mainstream firm committed to z-wave. Once you make that change you will discover that Fibaro controllers work best with Fibaro devices. This single switch was to replace a non-Fibaro device that kept going off line. So far so good....