FIBARO Flood Sensor
FIBARO Flood Sensor
- We use Australia Post Carbon Neutral Shipping: 2-5 Days $9.99, 1-3 Days $15 or StarTrack Premium $20
- Order before Midday and we Dispatch the same day
- Found a Cheaper Price we will Match it
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor
The device can be battery (ca. 2 years battery life) or VDC powered (12 or 24
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to an alarm system controller, through opening an NC contact.
The device has a built-in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by connected wire. The device has built-in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending an alarm signal in case of substantial inundation of water.
Product Details
Product Support
Manuals:
OPERATING MANUAL FLOOD SENSOR FGFS-101 v2.1 - v2.3
Videos / YouTube:Flood Sensor
Technical Specifications
Product Name
|
Flood Sensor
|
Battery Type
|
CR123A
|
Operation Range
|
30m
|
Power
|
12 - 24 VDC (optional)
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
Power Consumption
|
0,4W
|
Operation temperature
|
0 - 40C*
|
Measured temperature range | -20 to 100C |
Temperature measuring accuracy
|
0,5 C
|
Housing
|
ABS
|
Size (Diameter x Height)
|
72 x 28 mm
|