Step-by-Step Guide for Oz Smart Zigbee Door Sensor
Step 1: Download the App
- Download the "Smart Life" app from the App Store or Google Play to your mobile device.
Step 2: Add ZigBee Controller
- Follow the instructions to add a Tuya ZigBee controller. Note the differences between the wired and wireless version controllers as mentioned in the manual.
Step 3: Pairing the Door Sensor
- Enter pairing mode as described in the manual. The LED indicator will flash 2 times per second to indicate pairing mode.
Step 4: Configure the Device
- Follow the app instructions to configure your door sensor within the Smart Life app.
Step 5: Install the Sensor
- Remove protector on double sided tape and press firmly to the wall or frame for 30 secounds.
Step 6: Test the Sensor
- After installation, test the sensor to ensure it is working correctly. Look for LED indicators and app notifications as confirmation.
Specifications and Features
- Product Type: Sensor
- Connectivity: Zigbee
- LED Indicators: The manual describes different LED states, indicating various statuses like pairing mode.
- App Compatibility: Works with the "Smart Life" app.
- Installation: Specific instructions provided in the manual for correct placement and installation.
- Additional Features: The manua lists additional features like battery life, range, sensitivity settings, etc.
Oz Smart Zigbee Human Presence Sensor Manual
Oz Smart Zigbee Flood Sensor Manual
Oz Smart Zigbee Motion 3-in-1 Sensor Manual