GOAP Z-Wave Switch

  • Sale
  • Regular price $89.99

Order your products today choose express shipping and receive your package between and

The GOAP Z-Wave Switch

Is a Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of a digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.


Supported switches

The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Product Details


Compatible with any Z-Wave Controller.
Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
Power monitoring accuracy P=5-50W, +/-3W; P˃50W, +/-3%;
Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125°C
• Support for the connection of digital temperature sensor (optional part)
• binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc, 
Product Support


Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.


Do not connect the module to loads exceeding the recommended values. Connect the module only in accordance with the manual and diagrams below. Use only qualified electrician!


Single=  Installation Manual   (Size: 795KB)

Single Dry = Installation Manual   (Size: 719KB)

Double = GOAP Z-Wave Double Switch Installation Manual

Dimmer = GOAP Z-Wave Dimmer InWall Installation Manual

0-10v Dimmer = GOAP Z-Wave Dimmer 0-10V Installation Manual

Motor Control = GOAP Z-Wave 24v DC Tubular Motor Controller Manual

Videos / YouTube:


The smallest Z-Wave module



Technical Specifications


Product Name 
 Flush 1 relay
Powered by
24V DC or 240V AC
Operation Range
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
Operation temperature
-10 -+40 C*
Measured temperature range 0,5o C (within 0o C - 40o C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Dimensions (W x H x D)
41,8 x 36,8 x 15,4mm